Carousel

This service is used to configure the carousel on the LCD display.

To configure the carousel ; select the carousel service and click the "Main config. file..." button. See screenshot.

blank_sleep determines in seconds how long the blank screen should be displayed between items.

display_sleep determines in seconds how long each item should be displayed on the LCD display.

The other configuration items can be set to 0 or 1, where 0=disabled and 1=enabled.

The carousel reads the configuration file after each round, so any changes made to the configuration file, will take effect after one round on the LCD display.

The carousel can also be configured with the dingo-config tool.

  1. sudo dingo-config

  2. Choose 4 Advanced settings.

  3. Choose 2 Configure LCD display.

  4. Choose 1 Change LCD items to enable or disable the various items.

    Choose the other options to change the display settings in seconds for the blank screen and item screen.

  5. Use the arrow keys to navigate between the various items. Use the spacebar to enable or disable the items. Then choose Ok to save the changes.

Name: Carousel

Tag: LCD

Description: Only for editing configuration file.

Type: Other

Configuration file: /Adafruit_Python_SSD1306/examples/DEMO/carousel.conf

Log command:

Install command:

Start command:

Stop command:

Restart command:

Status command: test -f /Adafruit_Python_SSD1306/examples/DEMO/carousel.conf && cat /etc/rc.local | grep ^'sudo /Adafruit_Python_SSD1306/' && echo '(running)'

Enable command:

Disable command: