Installation and registration

The installation of OpenPort is done from a SSH terminal. We recommend using Putty (https://www.putty.org/).

To connect to the DINGO device, the IP of the DINGO device is needed. The IP address can be seen on the LCD display of the DINGO device. The SSH port is 22.

Run this command to start the installation:

sudo dingo-config

Choose "Install software" from the opening menu.

Then choose "Install OpenPort"

Choose "<Yes>" to register the device to OpenPort.

Enter the registration key for OpenPort.

Press "y" and hit the enter-key to overwrite the key-pair if they already exists.

Choose "<Back>" and then "<Finish>" to exit the DINGO Configuration Tool.